High-lifter Lift Kit for Kawasaki Mule 3020 Manuel d'utilisateur télécharger pdf

High Lifter Products, Inc. (318) 524-2270

780 N Professional Drive Fax (318) 524-2297

Shreveport, LA 71105

Kawasaki Mule Lift Kit Installation Instructions

Mule 2500, 3000, 3010, and 3020

Read Before Installation!

This product is designed for use on Kawasaki Mule’s in which additional ground clearance and fender clearance is desired. It

is designed for utility type, slower-speed use on relatively flat terrain in deep mud or snow. Although we have many thousands

of satisfied lift kit customers and over 400 franchised dealers selling and installing lift kits, purchasers should be aware that

use of this product may increase the frequency of required maintenance, part wear, and will raise the center of gravity on your

Mule increasing risk of roll-over on side hills, ditches or other steep terrain.

We recommend that wider tires with stiffer sidewalls be used to achieve a wider stance and to improve stability of the Mule.

Riders should be advised that the handling characteristics of a taller Mule is different and require extra care when riding on

side hills or off-camber situations. If you further raise the center of gravity by adding heavy loads to racks or seats, the Mule

must be operated with care, at slower speeds or on relatively flat ground.

Operation of any style ATV with or without a lift kit, while or shortly after consuming alcohol or drugs, subjects the rider to

the risk of serious bodily harm or possible death. This is compounded if the rider does not wear an approved helmet and other

safety gear. High Lifter urges that all approved safety gear be worn when riding an ATV.

If this is not what you expected, or is not consistent with your intended use, you should return the product immediately to the

seller,

before installation, for a refund of the purchase price; less any fees. After installation, product is warranted for 90 days

for defects in workmanship and materials. Warranty is limited to refund of the purchase price or replacement of the kit, at the

seller’s option.

Parts Diagram

1 2 3 4 5 6 7

High Lifter Products, Inc. (318) 524-2270 780 N Professional Drive Fax (318) 524-2297 Shreveport, LA 71105

Front Lift Installation 1. Ensuring that the parking brake is set, place jack under center of the Mule front end and lift until front wheels clea

NOTE: Keep in mind that if you remove the brake lines you must bleed your brakes according to operator’s manual. 6. Once the bottom of the str

Page 4

9. Now remove the factory coil spring. 10. Install the new High Lifter coil spring onto the strut shaft, making sure the end of th

Page 5

14. Once the block is in place reinstall the strut back onto the Mule. Start by placing the bottom of the strut into the lower strut mount. Make

Rear Lift Installation 1. Ensuring that the parking brake is set, place jack under the rear differential of the Mule and lift until re

Page 7

6. Reattach shock and repeat steps for opposite side. 7

Pas de commentaire

High-lifter Lift Kit for Kawasaki Mule 3020 Manuel d'utilisateur