High-lifter Lift Kit for Yamaha 550_700 Grizzly (07-14) - Sign Manuel d'utilisateur télécharger pdf

780 Professional Drive N. Shreveport, LA 71105 Phone (318)-524-2270 Fax (318)-524-2297

Yamaha 700 Lift Kit

Lift Kit Installation Instructions

Read Before Installation

This product is designed for use on ATVs and/or RUVs to increase ground clearance and fender clearance. It is

designed for utility type, slow-speed use on relatively flat terrain in deep mud or snow. Although we have many

thousands of satisfied lift kit customers and over 1,800 franchised dealers selling and installing lift kits, purchasers

should be aware that use of this product may increase the frequency of required maintenance, part wear, and will

raise the center of gravity on your ATV and/or RUV, increasing risk of roll-over, injury and death on all types of

terrain. It is your responsibility to always inform other operators and passengers of this vehicle about the added

risks.

We recommend that wider tires and/or wheel spacers be used to achieve a wider stance and to improve stability of the

ATV and/or RUV. Riders should be advised that the handling characteristics of a taller ATV and/or RUV are

different and require extra care when riding, particularly on side hills or off-camber situations. If you further raise

the center of gravity by adding taller tires, heavy loads to racks or seats, or by any other means, the ATV and/or RUV

must be operated with even more care, at slower speeds and on relatively flat ground. All turns should be done at a

slow speed, even on level ground.

Operation of an ATV and/or RUV with or without a lift kit, while or shortly after consuming alcohol or drugs,

subjects the rider to the risk of serious bodily harm or possible death. This risk is compounded if the rider does not

wear an approved helmet and other safety gear. High Lifter urges that all approved safety gear be worn when riding

an ATV and/or RUV as a driver or passenger.

If this product is not what you expected, or is not consistent with your intended use, you should return the product

immediately to the seller, before installation, for a refund of the purchase price; less any fees. After installation,

product is warranted for 90 days for defects in workmanship and materials. Warranty is limited to refund of the

purchase price or replacement of the kit, at the seller’s option.

Dealers and other Installers

You are responsible for informing your customer and end user of the information contained above and the increased

potential hazards of operating an ATV and/or RUV equipped with a lift kit. If you install the lift kit, it is your

responsibility to also install the warning label prominently in view of the driver and in prominent view of the driver

and passenger on RUVs and multi-passenger ATVs. They should also be instructed to notify anyone operating the

vehicle, as well as any passengers, that a lift kit is installed.

As discussed above, it is critically important that they be instructed in the need for slower speed operation, regardless

of terrain, after this lift kit is installed.

1 2 3 4 5 6 7 8

Yamaha 700 Lift Kit 1

Résumé du contenu

Page 1 - Yamaha 700 Lift Kit

780 Professional Drive N. Shreveport, LA 71105 Phone (318)-524-2270 Fax (318)-524-2297 Yamaha 700 Lift Kit Lift Kit Installation Instructions Re

Page 2

Parts Diagram

Page 3

Front Lift 1) Place ATV transmission in park. Place jack under center of ATV front end and lift until front wheels clear the ground. Be careful to

Page 4

6) Insert medium spacer in the center of the shock mounting tabs on the frame. Now insert the 10x65 bolt through the bracket, medium spacer and sma

Page 5

Rear Lift 1) Place jack under the center of the ATV, just forward of where the rear drive shaft connects to the engine, and lift until the weight is

Page 6

5) Disconnect the top of the shocks from both sides of the ATV. 6) Now insert long rear lift bracket next to the rear frame. 7) Insert medium

Page 7

8) Attach the top of the shock to the lift brackets by placing a 10mm flat washer on either side of it between the sock and brackets. Use a 10x70 he

Page 8

Commentaires sur ces manuels

Pas de commentaire

High-lifter Lift Kit for Yamaha 550_700 Grizzly (07-14) - Sign Manuel d'utilisateur

Naviguer en ligne ou télécharger Manuel d'utilisateur pour Matériel High-lifter Lift Kit for Yamaha 550_700 Grizzly (07-14) - Sign. High Lifter Lift Kit for Yamaha 550_700 Grizzly (07-14) - Signature Series User Manual Manuel d'utilisatio

Résumé du contenu

Commentaires sur ces manuels

Produits connexes et manuels pour Matériel High-lifter Lift Kit for Yamaha 550_700 Grizzly (07-14) - Sign