High-lifter Looney Tuned Slip-On Exhaust for Can-Am Renegade 8 Manuel d'utilisateur

Naviguer en ligne ou télécharger Manuel d'utilisateur pour Matériel High-lifter Looney Tuned Slip-On Exhaust for Can-Am Renegade 8. High Lifter Looney Tuned Slip-On Exhaust for Can-Am Renegade 800 (07-11) User Manual Manuel d'utilisatio

  • Télécharger
  • Ajouter à mon manuel
  • Imprimer
  • Page
    / 2
  • Table des matières
  • MARQUE LIVRES
  • Noté. / 5. Basé sur avis des utilisateurs
Vue de la page 0
Renegade/Outlander slip-on
INSTALLATION INSTRUCTIONS
PLEASE READ INSTRUCTIONS BEFORE ATTEMPTING INSTALLATION
Kit includes
1 Mid pipe
1 Silencer
2 8x60 bolt
4 flat washers
2 8mm nyloc nuts
1 51-53 Clamp
Installation instructions
Save your stock parts. Some may be used for installation of new pipe!
1. Remove your stock silencer leaving the stock head pipe.
2. install mid pipe sliding it over the end of the stock head pipe.
3. place the Silencer onto the mid pipe. Install the oem springs to your new mid pipe. Loosely
mount the silencer w/ the provided 8x60 bolts.
4. Tighten the silencer bolt (torque to manufactures specs).
5. After running this unit for the first 15-20 minutes allow the system to cool and re-check the
system for any loose bolts or nuts. It is also good to check the spark plug to see that you are
not running to lean or rich.
QUIET CORE:
Quiet core is an option. If you ordered the quiet core with this kit it come not installed. To
install the quiet core remove rear end cap (turn downs) and install the quiet core with the tubes
facing inward. Re-install the end caps
.
NOTE: Check your packing after 15-20hrs of riding for optimum power and lowest db levels.
It is your responsibility to read and understand these instructions.
Setting your Gen 3 TFI is the responsibility of you the owner. Due to other changes you may
have made to your machine and elevation we do not guarantee that what we have provided
is right for you. Use it as a good starting point and adjust it from there.
W
W
W
A
A
A
R
R
R
N
N
N
I
I
I
N
N
N
G
G
G
!
!
!
LOONEY TUNED EXHAUST DOES NOT TAKE RESPONSIBILITY FOR DAMAGE THAT MAY OCCUR DURING
OPERATION OF YOUR VEHICLE UNDER IMPROPER JET SETTINGS. IT IS THE FINAL RESPONSIBILITY OF THE
OWNER/RIDER TO ADJUST JETTING TO SPECIFIC RIDING CONDITIONS AND ELEVATION BEFORE RIDING.
Vue de la page 0
1 2

Résumé du contenu

Page 1

Renegade/Outlander slip-on INSTALLATION INSTRUCTIONS PLEASE READ INSTRUCTIONS BEFORE ATTEMPTING INSTALLATION Kit includes 1 Mid pipe 1 Silenc

Page 2

IMPORTANT MESSAGE—PLEASE READ AND UNDERSTAND WARRANTY LIMITATIONS Looney Tuned Exhaust (LTE) warrants only to the original purchaser the equipment p

Commentaires sur ces manuels

Pas de commentaire