High-lifter Looney Tuned Dual Exhaust for Kawasaki Teryx (08-1 Manuel d'utilisateur télécharger pdf

KAWASAKI TERYX 750

Install Instructions

Removal

Remove; both seats, the front driveline cover, center console covers, clutch air intake, the bed, (make sure to unplug the

lights) the stock muffler and mounting bracket, and the stock exhaust pipes. Save the stock header flange nuts and

exhaust gaskets

Install

1. Install the supplied mid-pipe bracket under the driver side rear sway bar mount using the supplied 8x25mm

bolts (See Pic 1)

2. Re-using the stock exhaust gaskets, Install the front header to the front cylinder and loosely tighten the exhaust

port nuts.

3. Install the front header to the midpipe, install the pipes from the rear of the car. install the midpipe to the

midpipe bracket and loosely install the supplied 8mm nut.

3. Re-using the stock exhaust gaskets install the rear head pipe to the rear cylinder and loosely tighten the

exhaust ports nuts.

4. Loosely install the supplied silencer clamps to the silencer brackets.(see pic 2)

5. Install the supplied muffler brackets to the Teryx Frame as shown with the supplied washer, nut, and bolt and

tighten. (see pic 3)

6. Install the LTE mufflers to the exhaust pipes and then to the frame and supplied brackets as shown (see pic 3)

7. Install the supplied springs to the mufflers and exhaust pipes.

8. Starting with the exhaust port nuts and moving to the rear of the car tighten all hardware to factory

specifications.

Optional throttle body modification

From the factory the Teryx throttle body butterflies are restricted to not open fully. To allow the butterfly to open

fully first remove the stock air filter housing and intake plenum. With the throttle pedal fully depressed loosen the jam nut

on the shown adjuster (see pic 4) and turn the adjuster until the butterflies open fully. Tighten the jam nut and install all

components in reverse order of removal.

9. Re-install the bed, clutch air intake, center console covers, front driveline cover, and both seats.

FIRSTRIDE:BeforetakingyourTeryxforthefirstridemakesureNOWIRESARETOUCHINGTHEEXHAUST.Yourfirst

ridewithyourTeryxafterinstallingyournewexhaustsystemshouldonlybe15‐20minutes.Thenletyour systemcool

andre‐tightenalltheboltsandclamps.

SilencerPacking:Werecommendcheckingyou’repackingevery15to20hoursofriding.Asyourdecibellevelwill

increaseandwithoutthepackingwilldamagetheinternalsofyoursilencers.NoWarrantywillbegivenforfailurefrom

lackofmaintaining.



1 2 3

Résumé du contenu

Page 1 - KAWASAKI TERYX 750

KAWASAKI TERYX 750 Install Instructions Removal Remove; both seats, the front driveline cover, center console covers, clutch air intake, the

Page 2 - WARRANTYLIMITATIONS

IMPORTANTMESSAGE—PLEASEREADANDUNDERSTAND!WARRANTYLIMITATIONSLooneyTunedExhaust(LTE)warrantsonlytotheoriginalpurchasertheeq

Page 3

Commentaires sur ces manuels

Pas de commentaire

High-lifter Looney Tuned Dual Exhaust for Kawasaki Teryx (08-1 Manuel d'utilisateur

Naviguer en ligne ou télécharger Manuel d'utilisateur pour Matériel High-lifter Looney Tuned Dual Exhaust for Kawasaki Teryx (08-1. High Lifter Looney Tuned Dual Exhaust for Kawasaki Teryx (08-10) User Manual Manuel d'utilisatio

Résumé du contenu

Commentaires sur ces manuels

Produits connexes et manuels pour Matériel High-lifter Looney Tuned Dual Exhaust for Kawasaki Teryx (08-1