High-lifter Lift Kit for Yamaha Grizzly 600 (98-01) Manuel d'utilisateur télécharger pdf

High Lifter Products, Inc. 318-524-2270

780 N Professional Drive 318-524-2297

Shreveport, LA 71105

Yamaha 600 Grizzly Installation Instructions

Read Before Installation!

This product is designed for use on ATVs on which additional ground clearance and fender

clearance is desired. It is designed for utility type, slower-speed use on relatively flat terrain in

deep mud or snow. Although we have many thousands of satisfied lift kit customers and over 400

franchised dealers selling and installing lift kits, purchasers should be aware that use of this

product may increase the frequency of required maintenance, part wear, and will raise the center

of gravity on your ATV increasing risk of roll-over on side hills, ditches or other steep terrain.

We recommend that wider tires and/or wheel spacers be used to achieve a wider stance and to

improve stability of the ATV. Riders should be advised that the handling characteristics of a taller

ATV are different and require extra care when riding on side hills or off-camber situations. If you

further raise the center of gravity by adding heavy loads to racks or seats, the ATV must be

operated with care, at slower speeds or on relatively flat ground.

Operation of an ATV with or without a lift kit, while or shortly after consuming alcohol or drugs,

subjects the rider to the risk of serious bodily harm or possible death. This is compounded if the

rider does not wear an approved helmet and other safety gear. High Lifter urges that all approved

safety gear be worn when riding an ATV.

If this is not what you expected, or is not consistent with your intended use, you should return the

product immediately to the seller,

before installation, for a refund of the purchase price; less any

fees. After installation, product is warranted for 90 days for defects in workmanship and

materials. Warranty is limited to refund of the purchase price or replacement of the kit, at the

seller’s option.

Parts List

2- 12x90mm Bolts 5- Lift Brackets

2- 12mm Nuts 2- Pages of Diagrams

2- 12mm Washers 2- Pages of Instructions

1 2 3 4

High Lifter Products, Inc. 318-524-2270 780 N Professional Drive 318-524-2297 Shreveport, LA 71105 Yamaha 600 Grizzly Installa

Page 2

Front Lift 1) Place jack under center of ATV front end and lift until front wheels clear the ground. Be careful to support ATV properly so that it i

Page 3

Parts List “A” - 2 “C” - 1 “B” - 1 “D” - 1

Installation Diagram Rear Assembly Shock “B” “D” “C” Front Assembly Top Nut “A

Pas de commentaire

High-lifter Lift Kit for Yamaha Grizzly 600 (98-01) Manuel d'utilisateur