High-lifter Lift Kit for Suzuki Twin Peaks 700 Manuel d'utilisateur télécharger pdf

High Lifter Products, Inc. (318) 524-2270

780 N Professional Drive Fax (318) 524-2297

Shreveport, LA 71105

Kawasaki 650/360 Prairie Lift Kit

Installation Instructions

Read Before Installation!

This product is designed for use on ATVs on which additional ground clearance and fender clearance is

desired. It is designed for utility type, slower-speed use on relatively flat terrain in deep mud or snow.

Although we have many thousands of satisfied lift kit customers and over 400 franchised dealers selling

and installing lift kits, purchasers should be aware that use of this product may increase the frequency of

required maintenance, part wear, and will raise the center of gravity on your ATV increasing risk of roll-

over on side hills, ditches or other steep terrain.

We recommend that wider tires and/or wheel spacers be used to achieve a wider stance and to improve

stability of the ATV. Riders should be advised that the handling characteristics of a taller ATV are

different and require extra care when riding on side hills or off-camber situations. If you further raise the

center of gravity by adding heavy loads to racks or seats, the ATV must be operated with care, at slower

speeds or on relatively flat ground.

Operation of an ATV with or without a lift kit, while or shortly after consuming alcohol or drugs,

subjects the rider to the risk of serious bodily harm or possible death. This is compounded if the rider

does not wear an approved helmet and other safety gear. High Lifter urges that all approved safety gear

be worn when riding an ATV.

If this is not what you expected, or is not consistent with your intended use, you should return the

product immediately to the seller,

before installation, for a refund of the purchase price; less any fees.

After installation, product is warranted for 90 days for defects in workmanship and materials. Warranty

is limited to refund of the purchase price or replacement of the kit, at the seller’s option.

This lift kit contains the following parts:

12x75mm Bolt 1 Pages of Diagrams 1

12mm Nuts 1 Pages of Instructions 2

Lift Brackets 3

1 2 3

High Lifter Products, Inc. (318) 524-2270 780 N Professional Drive

Front Lift 1) Place jack under center of ATV front end and lift until front wheels clear the ground. Be careful to support ATV properly so that i

Parts List “A” Quantity-2 “B” Quantity – 1 Front Mounting AssemblyFront Mounting Assembly Top Nut C-Clip Strut Mount

Pas de commentaire

High-lifter Lift Kit for Suzuki Twin Peaks 700 Manuel d'utilisateur