High-lifter GUARDS DIAMOND PLATE FRONT CV BOOT YAM. 660 GRIZZ Manuel d'utilisateur télécharger pdf

High Lifter Products, Inc. (318) 524-2270

780 Professional N. Dr. Fax (318) 524-2297

Shreveport, LA 71105

Yamaha 660 Grizzly

Front CV Boot Covers

Components:

CV Boot Covers 2ea

¼ x 1” Bolts 4ea

¼ “ Hex nut 4ea

Installation:

1. To make installation easier, turn off the gas inlet valve, place the transmission in park, and with

assistance stand ATV on its rear.

Installation can be done with ATV on the ground.

NOTE:

Anytime an ATV stands on its rear there is a danger of it falling. It is recommend that when

the ATV is standing on its rear that it be secured to a stable object, using a rope or ratchet strap.

2. Remove the plastic factory CV covers.

3. Install the High Lifter Front CV Boot Covers, using the factory holes and hardware provided.

4. Check the routing of electrical wires on the inside edge of the left CV Boot

Guard and if necessary move wires to the backside of the frame.

High Lifter Products, Inc. (318) 524-2270 780 Professional N. Dr. Fax (318) 524-2297 Shreveport, LA 7110

Pas de commentaire

High-lifter GUARDS DIAMOND PLATE FRONT CV BOOT YAM. 660 GRIZZ Manuel d'utilisateur